| Title | Analysis on Bearing Capacity of Tunnel-Type Anchorage of a Long-Span Suspension Bridg |
| Authors | 卫军 |
| Issue Date | 2005 |
| Keywords | 隧道 悬索桥 轴承 稳定性分析 岩爆 |
| Citation | 中国地质大学学报：英文版,2005,(第3期). |
| Abstract | Due to complicated rock structure and environment, a prototype test for a tunnel-type anchorage is infeasible. Based on the rock mass parameters from tests, a three-dimensional (3D) elasto-plastic analysis was performed to simulate the influence of the construction procedure of Siduhe bridge with tunnel-type anchorage (TTA) in Hubei Province, China. The surrounding rock and concrete anchorage body were simulated by 8 nodes 3D brick elements. The geostatic state of the complex geometric structure was established with initial data. The in-situ concrete casting of the anchorage body and excavation of the rock mass were simulated by tetrahedral shell elements. The results show that the surrounding rock is in an elastic state under the designed cable force. The numerical overloading analysis indicates that the capacity of the surrounding anchorage is 7 times that of the designed cable force. The failure pattern shows that two anchorage bodies would be pulled out in the end. The maximum shear stress appears 10 m before the back anchorage face. The maximum range influenced by the TTA under ultimate loads is about 16 m. |
| ISSN | 1002-0705 |
| Appears in Collections: | 城建院办公室 |
Original Search
